CRHFPP040500NC 5um CRHFPP0402000NC 20um Hqfiltration High flow water treatment folding filter element
Product Features
1. Large diameter of 6 inches/152mm, one end open, the filtering fluid flows from inside to outside, it can cause pollution by falling impurities after filtering
2. The deep folding structure and multi-layer filter membrane combination have higher filtration efficiency than traditional melt blown and wire wound filter elements. At the same time, the large diameter design of the filter element increases the effective filter area and can greatly extend the life of the filter element and reduce the number of filter elements. And reduce the size of the filter housing, saving costs
3. Suitable for filtration of various large-flow fluids: RO security filtration, seawater desalination filtration, cooling water filtration, chemical raw materials, beverages, biopharmaceuticals, solvents, water filtration
4. The filter element is produced, cleaned, tested and packaged in a clean room with a cleanliness of 10000.
Product specifications
Structural material: melt-blown fine PP polypropylene fiber filter membrane
Support film: PP polypropylene
Frame: PP polypropylene
Gasket/seal ring: EPDM EPDM, Viton fluorine rubber, Silicone silicone rubber, Buna-N nitrile rubber, Teflon PTFE coated fluorine rubber
Dimensions:
Outer diameter: 6'<152mm>
Length: 20'<508mm>, 40'<1016mm>, 60'<1524mm>
Performance parameter
Filter accuracy: 1, 3, 4.5, 10, 20, 40μm
Working temperature: 140οF<60℃>
It is recommended to replace the pressure difference: 30psid<2.1bar>
Application field
Food and beverage industry
Seawater desalination treatment
Cooling water system
Industrial water
Reverse osmosis prefiltration
Process water and wastewater treatment
Filtration accuracy/liquid flow rate and initial pressure difference
Filter rating μm | Initial pressure difference 20” /508mm <×100>bar/lpm | Initial pressure drop 40”/1016mm <×100>bar/lpm | Initial pressure drop 60”/1524mm <×100>bar/lpm |
1 | 0.0090/0.0164 | 0.0049/0.0089 | 0.0040/0.0073 |
3 | 0.0070/0.0127 | 0.0035/0.0064 | 0.0027/0.0049 |
4.5 | 0.0042/0.0076 | 0.0022/0.0040 | 0.0017/0.0031 |
10 | 0.0035/0.0064 | 0.0019/0.0035 | 0.0010/0.0018 |
20 | 0.0025/0.0046 | 0.0013/0.0024 | 0.0009/0.0016 |
40 | 0.0010/0.0018 | 0.0007/0.0013 | 0.0005/0.0009 |
Recommended to optimize the system performance with a single filter element with large flow:
Length of filter element | Recommended working flow rate |
20” | 110/25 |
40” | 220/50 |
60” | 308/70 |
