RFB-160X1L-C HQFILTRATION Replace Of LEEMIN RF Series Direct Return Oil Filter

Introduction:

RF series return oil filter is used for fine filtration of hydraulic system return oil, filtering out metal particles generated by wear of components in the hydraulic system and rubber impurities of seals and other pollutants, so that the oil flowing back to the tank remains clean.

1. This filter can be directly installed on the tank cover or installed with a pipe.

2. It is equipped with a filter element pollution blockage transmitter and a bypass valve to improve the reliability of hydraulic exchange

3. The filter element is made of glass fiber, which has the advantages of high filtration accuracy, large oil flow capacity, small original pressure loss, and large dirt holding capacity.

Feature:

1. Easy installation and connection, simplified system pipeline:

This filter can be directly installed on the side, bottom or top of the oil tank, the filter head is exposed outside the oil tank, the oil suction cylinder is immersed below the liquid level in the oil tank, the oil outlet is equipped with a pipe type and flange type connection, and the filter is equipped with a self-sealing valve and other devices, so that the pipeline does not need to install other pipe fittings such as a stop valve, thereby simplifying the pipeline and facilitating installation.
2. The self-sealing valve is set to make it very convenient to replace, clean the filter element or repair the system:

 When replacing, cleaning the filter element or repairing the system, you only need to unscrew the filter end cover (cleaning cover), and the self-sealing valve will automatically close, isolating the oil tank oil circuit, so that the oil in the oil tank will not flow out, making it very convenient to clean, replace the filter element or repair the system. If the self-sealing valve is opened, it can also be used to drain the oil from the oil tank.
3. It has a filter element pollution indicator and an oil bypass valve to improve the reliability of the hydraulic system:

When the filter element is blocked by pollutants and the vacuum degree of the oil outlet is 0.018MPa, the indicator will send a signal, and the filter element should be replaced or cleaned in time. If the machine cannot be stopped immediately or no one comes to replace the filter element, the oil bypass valve on the upper part of the filter element will automatically open (the opening value is: vacuum 0.02MPa) to avoid the oil pump from sucking air. However, the machine should be stopped to replace or clean the filter element to keep the hydraulic system clean and improve the reliability of the hydraulic system.

Similar products:

Package & Shipment:

Package: Plastic bag inside, Paper box outside. Usually we pack filter element by paper boxes. And use export standard wooden boxes or pallets for heavy goods.

Shipment: Express For Small Package, and also could offer Express lines service for Southeast Asian countries, Central Asian countries, Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight, with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe. and could offer door to door service!