Activated carbon filter element

Product introduction

Activated carbon filter core is made by adding activated carbon particles to binder, heating and sintering, continuous extrusion. The filter core has excellent adsorption performance of granular activated carbon, precise filtration characteristics of tubular elements, good adsorption effect, and can effectively remove particles, rust, residual chlorine, odor, color and organic matter in water.

The inner layer of the filter element is polypropylene skeleton, which is used to strengthen the compressive strength of the filter element. The framework is coated with two layers of polypropylene ultrafine fiber felt, which can intercept the liquid and bring out particles larger than 10 microns through the carbon core. Carbon core is coated with 20% polypropylene ultra-fine fiber felt, which can intercept particles larger than 10-20 microns in liquid, so that the filter core has dual functions of filtration and purification. The outer layer is a white plastic mesh cover, which makes the filter core have a complete appearance and a neat appearance. Soft NBR end caps are installed at both ends of the filter cartridge, which makes the filter cartridge have good sealing property after being loaded into the filter cartridge.

Carbon fiber filter core, which is made of nano-scale ultrafine fibers, has more efficient adsorption performance.

Performance characteristics

Collect adsorption, filtration, interception, catalytic action in one;

Acid, alkali, salt and various organic solvents;

High filtration accuracy, large flow rate, small pressure difference, high compressive strength, large contamination capacity, non-toxic and tasteless, no secondary pollution.

Application area

It can be widely used in purified water, semiconductor, electroplating line, printed circuit board, compressed air and gas filtration.

Chemical and petrochemical industry: solvent, paint, magnetic slurry, detergent, liquid wax, etc.

Pharmaceutical and Pharmaceutical Industry: Hospital Water, Pharmaceutical Injection, Medium Serum, etc.

Food industry: food, beverage, drinking water, wine and so on.

Technical parameter

Work pressure drop: 0.1-0.2 kgf/cm

Maximum pressure: 7kgf/cm

Maximum pressure difference: 4 kgf/cm

Maximum operating temperature: 60 degrees

Maximum flow rate: 8L/min (pressure difference 0.15Kgf/cm, 10 inches)

Surface area: 800-1000/g

Outer diameter of filter element: 65mm

Inner diameter of filter element: 30mm

Length of filter element: 10, 20, 30, 40 inches

Iodine adsorption value: 900mg/g

Benzene adsorption capacity: 20-25%

Adsorption value of methyl blue: 13-16ml/g

COD removal rate: 58.25%

Removal rate of residual chlorine: > 96.83%