JIAOZUO HUAQING FILTRATION EQUIPMENT CO.,LTD.

sales@hqfiltration.com


PRODUCT Products
Products / Products
发布时间: 2019 - 05 - 04
Phenolic resin filter elementProduct Profile:Phenolic resin composite filter is a patent breakthrough in the design of resin composite filter. The external spiral winding structure can collect a large number of particulate impurities, and the internal structure can intercept particulates with corresponding precision, which is suitable for high viscosity and high temperature fluids.Technical parameters:Filtration accuracy (micron): 2,5,10,25,50,75,125,150Maximum temperature resistance: 121 degrees CelsiusFilter Material: Special Long Fiber, Phenolic ResinFiltering Direction: Out-in-outThe filter element length is 10, 20, 30 - 40 inchesFilter core diameter: 2.56 inchesEnd Cover Form: DOE (Open Flat at Both Ends)Flow rate (2.74'diameter): (1.1 m3/hr/10' inch filter element)Application industr...
发布时间: 2019 - 05 - 04
Large flow water filter elementTechnical parameterFiltration accuracy: 1 micron, 4.5 micron, 6 micron, 10 micron, 20 micron, 40 micron, 70 micron, 100 micronOuter diameter of filter element: 60 '(152mm)Length of filter element: 20','40','60'“Component Material: Filter Material: Folded Glass Fiber, Folded Deep Polypropylene, Melt Blown PolypropyleneSupport/diversion layer: polypropyleneSealing Ring Material: Ethylene-propylene Rubber, Nitrile-butadiene RubberMaximum operating temperature: folded glass fiber 120 C, folded polypropylene 82 C, melt blown polypropylene 65 CMaximum pressure drop: folded glass fiber 3.4bar 121 C, folded polypropylene 3.4bar 82 C, melt blown polypropylene 1.03bar 65 CRecommended Pressure Drop for Replacement of Filter Core: 2.4 bar 20 CProposed maximum filtration ...
发布时间: 2019 - 05 - 04
Water Sample Filter CoreProduct introductionWire-wound filter element is installed in the filter. The size of the filter element is relatively small. It is used to filter the water sample of the instrument and protect the instrument electrode.1. The shell is made of plexiglass.2. When replacing the filter element, the lower end cap should be unscrewed.3. Install check valve at outlet of water sample filter to prevent instrument electrode from losing water4. Connection mode: threaded connectionTechnical parameter1. Nominal Pressure: 2. Experimental pressure: 1.0 Mpa3. Applicable medium: instrument sample water4. Applicable Temperature: 5. Maximum flow: 2000ml/minPerformance characteristics1. High filtration accuracy, small pressure difference, large flow rate, long service life of pollution...
Contact us
Tel: 86 391-8346801
Fax: 86 391-8346801
Cell: +86 15239198219
Mail: sales@hqfiltration.com
Add: A15,Aliyun Innovation Center,Intelligent Hardware Port #1,West of Zhengbei Avenue,Wuzhi C, Jiaozuo C, Henan P.China.
PP Meltblown Filter Element
Send Inquiry
产品名称:

PP Meltblown Filter Element

上市日期: 2017-08-10

Cell: +86 15239198219

Email: sales@hqfiltration.com

 

Introduction

PP meltblown filter element made of hot-melt entangled polypropylene microfiber, do not use any chemical adhesives, fiber bonding is formed in the space random from three-dimensional microporous structure, fabric collection surface, deep, coarse filter in one, As the fiber and density form high filtration precision and assimilative capacity in the diameter direction of the filter element, the pressure difference is small, deep filtration structure within the outer sparse density gradient pore size, strong pollutant that can remove suspended solids in the liquid flow effectively, particulates, rust and other impurities, high filtering effect, life is long.

 

Property

PP meltblown filter element aperture compact and uniform, filtration efficiency is high. Due to particle bridging phenomenon occurs in PP meltblown filter element pores, make less than pore blocking particles can be live, filtration efficiency is above 99%, PP meltblown filter element itself cleanness of water pollution, resist acid , alkali and other chemicals and organic solvents corrosion.

 

Specifications

Filtration precision: 0.5μm, 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 40μm, 50μm, 75μm

ter element Length: 10 ", 20", 30 ", 40", 50 ", 60"

filter element outter diameter: 63mm, 115mm

filter element inner diameter: 28mm

Maximum pressure: 21 ℃, 2.0bar

Highest temperature: 50 ℃


PP Meltblown Filter Element    PP Meltblown Filter Element


Application

Use for the livelihood of drinking water filter RO reverse osmosis filter

Used for industrial process acid liquid filtration

Filter industrial water, electroplating filter

Imaging liquid,filter ink

Sterile water, ultra pure water pre-filtration treatment

Chemical raw materials, organic solvent filtration


Filter rating  

Length

Cover form

Sealing materials

1μm

 10"

222-rings,one open,Hirao  

V: Viton

3μm

 20"

 222-rings,one open,finned

S: Silicone Rubber

5μm

 30"

-226-Ring, one open, Hirao

E: EPDM

 10 μm

 40"

-226-Ring, one open, finned

B: Nitrile rubber ring

 20 μm

 50"

   -226 / Hirao


 50μm

 60"

   -226 / Fin


 75μm   


Inner within O- rings / Hirao


 

Send Inquiry
  • Name:
  • *
  • Email:
  • Tel:
  • *
  • Country:
  • 地址:
  • 传真:
  • 邮政编码:
  • 留言主题:
  • Content:
Related products / Related Products More
2019 - 05 - 04
Phenolic resin filter elementProduct Profile:Phenolic resin composite filter is a patent breakthrough in the design of resin composite filter. The external spiral winding structure can collect a large number of particulate impurities, and the internal structure can intercept particulates with corresponding precision, which is suitable for high viscosity and high temperature fluids.Technical parame...
2019 - 05 - 04
Large flow water filter elementTechnical parameterFiltration accuracy: 1 micron, 4.5 micron, 6 micron, 10 micron, 20 micron, 40 micron, 70 micron, 100 micronOuter diameter of filter element: 60 '(152mm)Length of filter element: 20','40','60'“Component Material: Filter Material: Folded Glass Fiber, Folded Deep Polypropylene, Melt Blown PolypropyleneSupport/diversion layer: polypropyleneSealing Ring...
2019 - 05 - 04
Water Sample Filter CoreProduct introductionWire-wound filter element is installed in the filter. The size of the filter element is relatively small. It is used to filter the water sample of the instrument and protect the instrument electrode.1. The shell is made of plexiglass.2. When replacing the filter element, the lower end cap should be unscrewed.3. Install check valve at outlet of water samp...
2019 - 05 - 04
Wire wound filter element Product descriptionThe wire-wound filter has a good filtration performance, and the textile fiber yarn is precisely wound on the porous skeleton. The yarn materials include polypropylene fiber, acrylic fiber, and absorbent cotton fiber. By controlling the winding tightness and the density of the yarn during winding, it is possible to produce filter cores with di...
Navigation
Message
Contact
Search
  • Name:
  • *
  • 公司名称:
  • *
  • 地址:
  • *
  • Tel:
  • *
  • 传真:
  • *
  • E-mail:
  • *
  • 邮政编码:
  • *
  • 留言主题:
  • *
  • Cont:
  • *
     
Address:Aliyun Innovation Center,Wuzhi C, Jiaozuo C, Henan P.China.

Tel:  86-391-8346801
Cel: +86 15239198219
Fax: 86-391-8346801
Email : sales@hqfiltraion.com
HQ-FILTER
2773862516
+86 15239198219
+86 15239198219
Copyright ©2003 - 2029 Jiaozuo Huaqing Filtration Equipment Co. LTD


X
等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • +86 15239198219 Cell
6

二维码管理

  • Wechat
等待加载动态数据...

等待加载动态数据...

展开